1050 Autodrive™ to Apex 10®/Evolution™ Hardware Conversion kit

In Stock.
$270.32
In Stock.
SKU
101-1119
If you are a Mark 7® customer with a 1050 Autodrive™, this conversion kit is for you. The kit contains everything you need to turn your current Autodrive™ 1050 into an Autodrive™ for your Apex 10/Evolution™. Once you get the Apex 10/Evolution™ press, you will be able to bolt it onto the base of your Autodrive™ and you will have the equivalent of an Apex 10/Evolution™ driven by the Autodrive™. This kit is compatible with all 1050 models; with the included software your converted Autodrive™ will operate an Apex 10/Evolution™ at 3500 RPH.
 
Included with the package are the following items:
  • Kevlar reinforced drive belt 
  • Apex 10/Evolution™ sprockets 
  • Sprocket to press attachment and hardware
  • Apex 10/Evolution™ software and firmware
  • Stencil template, drill and tap
If you are a Mark 7® customer with a 1050 Autodrive™, this conversion kit is for you. The kit contains everything you need to turn your current Autodrive™ 1050 into an Autodrive™ for your Apex 10/Evolution™. Once you get the Apex 10/Evolution™ press, you will be able to bolt it onto the base of your Autodrive™ and you will have the equivalent of an Apex 10/Evolution™ driven by the Autodrive™. This kit is compatible with all 1050 models; with the included software your converted Autodrive™ will operate an Apex 10/Evolution™ at 3500 RPH.
 
Included with the package are the following items:
  • Kevlar reinforced drive belt 
  • Apex 10/Evolution™ sprockets 
  • Sprocket to press attachment and hardware
  • Apex 10/Evolution™ software and firmware
  • Stencil template, drill and tap
Newer Autodrives already have mounting holes drilled for both 1050 and Apex 10/Evo platforms. For older autodrives (pre-2019), the process involves laying the stencil on the base of your current Autodrive™. Carefully drill holes with the included drill bit as indicated in the stencil.  Then use the included tap to create the threads in the drilled holes. Now you have holes that accommodate the base of the Apex 10/Evolution™ press - simply bolt the press to the base, connect the included hardware and you are ready to go! Available for your current 1050X/PRO Autodrive™.
Specifications
SKU101-1119
Write Your Own Review
Write a Review1050 Autodrive™ to Apex 10®/Evolution™ Hardware Conversion kit
Apex 10® / Evolution™ Autodrive™ Previous Apex 10® / Evolution™ Autodrive™
To Top